When we look into communicating an FPGA with a computer, the first interface that we can find is UART, but this interface has several limitations in terms of speed. In order to transfer high amount of data between the CPU…
On the last post, we talk about the using of DMA to send data between PL and PS on SOC or MPSOC devices. The example that I proposed, was a kind of FFT compute accelerator, where a signal stored on…
On many applications, specially when we talk about signal processing, on the same application there is a mix of real time processing and a non-real time operating system, or on machine learning applications, when we can have a mix of…
I will use this post to show you how, creating an AXI IP, we can accelerate our applications on Petalinux, or in case we use a Zynq MPSOC, we also can accelerate an application running in the RPU. As you…
This week I have received the big (big) sister of the Eclypse Z7, the Digilent’s Genesys ZU. This board, due to its FMC, ZMOD and PMOD is a good choice for signal processing applications, but first, let’s take a look…
In my last post, I said 2 things come to my mind when we talk about signal processing. One of them is FFT, and I explained you how to compute an xFFT on the Digilent’s EclypseZ7, or other Xilinx 7…
When we talk about digital signal processing, 2 things come to my mind. First one is the sinc wave, used as a cover page of a lot of books about signal processing, and the second one, is the fourier transform.…
Few months ago, Digilent presented their new development platforms based in Zynq and Zynq US+, with connectors compatibles with SYZYGY standard. This standard is in the middle between PMOD and FMC, with the enormous advantage that can be soldered by…
Due to quarantine, most of us are working from home, and seems that the way we used to work, even more when our work consist in write or develop with our laptop, will be change. When your work is computer…
We are in front of our customers, we have our design fully tested in our lab, all analog and digital filters works perfectly, but, in the customer installations there are an unknonw noise source. In this case, we must recompute…
